ZOTL10

z10anglefront copy.JPG
z10front2 copy.JPG
z10side copy.JPG
silv40.jpg
z10back copy.JPG
z10inside copy.JPG
z10anglefront copy.JPG
z10front2 copy.JPG
z10side copy.JPG
silv40.jpg
z10back copy.JPG
z10inside copy.JPG

ZOTL10

2,600.00
Quantity:
Add To Cart

A new amp by David Berning, the ZOTL10 is his take on an EL-84 based circuit.  The ZOTL10 Power Amplifier provides 10 watts per channel output of accurate, uncolored sound with automatically protected circuitry. 

Specifications

• Sensitivity: 1.2V RMS for 10 watts output
• Output impedance 1.2 ohms
• Input impedance: 50k
• 100V / 120V / 240V operation: Auto-switching
• Hum and noise: 94dB below full output (measured at 20Hz-20kHz) • Carrier: -50dB (460kHz)
• Power output with 4-ohm load: 12W, 0.5% THD
• Power output with 8-ohm load: 10W, 0.5% THD
• Frequency response (8-ohm load): 6Hz to 60kHz, +0, -.5dB
• Amplifier class: Push-pull Class AB
• Voltage gain (8-ohm load): 18dB
• Size: 9 inches (23 cm) wide, 8 1/2 inches (22 cm) tall, 18 inches (46 cm) deep (including connectors)
• Net weight: 14 lbs. or 6.4 kg
• Finish: Aluminum case
• Tube complement: two 12AT7s, two 12AU7s, and four EL-84s

Dimensions

H - 8.5", W - 9", L - 14.5" (including binding posts)